Completech Products
Optimized & Industry-ready Solutions
For All Your Communication Needs
Gross Automation is proud to offer a full line of CompleTech products. CompleTech is the supplier of choice for antennas, splitters and lighting protection. In addition, CompleTech’s products are some of the fastest and most reliable antennas available in the communication industry. Cables can be ready made from cut to length, connectors mounted, weatherproofed, tested, and marked. Furthermore, these products are supplied by the CompleTech and ComAnt® brands, which, provide reliable and robust communication. CompleTech products are exclusively distributed in the Americas by Gross Automation.
Distributed by Gross Automation
Products Featured by CompleTech!
Antennas
CompleTech’s antennas offer a combination of durability, lightweight, and low wind load. In addition, the antennas feature radome enclosed radiator, IP67 proof construction, UV protected glass fiber radome, DC shorted and grounded feed point, and also can integrate impedance. Furthermore, all electromechanics are molded inside of closed-cell PU foam.
Lightning Protection
Lightning protectors are maintenance free and offer continuous communication. In addition, the protectors offer immediate response, no voltage increase, low residual pulse, intermodulation safe, a DC (short and direct ground), and a band pass filter. In addition, they can also cancel even harmonic frequencies.
Tilting Plate
CompleTech’s mechanical tilting plate allows, depending on the mounting orientation, a mechanical down or up tilting, up to 45 degrees. In addition, the tilting angle is also continuously adjustable. It can be also used to adjust the antenna orientation on the horizontal plane when the antenna is mounted on a horizontal pole.
Splitters
Splitters combine multiple antennas, build up a distribution cable harness, and minimize the amount of junctions and losses. In addition, the splitters feature a 1 to 2 power splitting ratio and can have different splitting ratios by cascading. No additional jumper cables or connectors are required.